Wheelarch Covers (Pair)

Suitable Models: TR4, TR4A, TR5, TR250

£109.96£207.99 exc. VAT UK Customers ONLY - VAT (20%) will be calculated at checkout.

Despite being situated behind the Front Seats – these pre-sewn covers are obvious to anyone observing your beautiful Triumph TR4/4A/5/250 from the outside. Made to the original specifications for the TR4 to TR250 range, with White beading (piping) – these are an ideal starting point on your interior restoration project; or just what you need to finish off the job. Available in a variety of materials and colours – please see below for more in-depth descriptions, videos, and frequently asked questions (FAQs).

Clear
⟲ Clear Selection

Recommended Colour Shades These are the colour shades that JSM can supply/recommend as suitable interpretations of original colours as stated on heritage certificates. Other "custom" shades also available.

SKU: TR-042700 Categories: , Tags: , , , ,

After the overhaul of the Triumph TRs in the early 1960s with a somewhat radical redesign by Italian designer Giovanni Michelotti, the majority of the interior trim items were also completely updated. The overall body shape of the cars remained fairly consistent from the TR4s of the early 1960s, all the way through to the TR6s of the 1970s. This meant that the covers used to cover the cockpit wheel arch wheels behind the Seats remained the same for the fourteen year period of TR4 to TR6 cars. These were sewn material assembly covers which were then bonded directly to the metal bodywork of the chassis itself. There was a piping strip running from rear bulkhead to the rear floor pans, which define the shape and position of the material covers in the car.

These covers were originally supplied in Vynide (Leathercloth) from the factory production line. Commonly these days, this material is superseded with Vinyl (Ambla), although Leathercloth (Vynide) is still available if requested (colour dependent). Very few cars, if any, would have left with Leather covers – and if they did, this would have been a special order item. Note when “Leather” is mentioned on the heritage certificates, this is often referring to the Seats and some of the Cappings around the cockpit of the car. See our FAQs for more information. As with its predecessor – the Triumph TR4 models – and all proceeding models until the TR6 – used White piping on most of its panel upholstery areas, and Seat Covers, with possibly a few special orders cars leaving with matching or different coloured piping. With the introduction of the TR6 model, Triumph switched back to using the same colour piping as the main trim – as they had originally done with the TR2 models in the early 1950s. This piping was originally a soft pvc plastic – which is still available in white or black. We recommend that you read our FAQs section below for further information on the pipings available and its suitability to the purpose for certain parts.

Our rear wheel arch covers are templated using the original factory designs – and have used these to great effect for decades now. We have introduced subtle changes to improve suitability to the purpose; including the extending of the unsewn edges to allow for overlaps onto adjacent sections of the chassis – ensuring no bodywork is left exposed. We recommend that we manufacture using leathercloth (where available) for the piping sections, ensuring the piping beading is the correct size and not too bulky; and our piping core material is the correct rigidity to ensure that the shape of the trimmed wheel arch cover is maintained correctly. However, we can revert to the original soft plastic pvc piping if you prefer. It is attention to detail, even on the smallest of things, that has led us to become the industry leader when it comes to quality and workmanship of the interior trim and upholstery for the Triumph TRs.

DETAILS

  • Available in Leather, Vinyl (Ambla) or Leathercloth (Vynide).
  • Two options of automotive-grade leather available to choose from – “grained” or “smooth” surface finish.
  • Includes piping/beading running from the bulkhead to the rear floors, as per original specifications.
  • Comes with pre-cut 3mm foam paddings for attaining a smoother finish when fitting to the car.

Why JSM?

  • Made in England, only 50 miles away from the original production line.
  • We source only the highest quality raw materials to manufacture our products – including leather from Italy and Scotland.
  • John Skinners offer the widest range of colour options on the market – including all the correct original colour combinations, as well as many more custom shades.
  • Worldwide material and colour samples service is available upon request, to ensure you get the look and finish your car deserves.
  • Our kits are manufactured using the same methods and templates that we have used to great success for 40+ years. Rest assured, we know they fit!
  • JSM has contributed to various notable Triumph restorations including TS01, and the much-publicised Triumph TR2 “Jabbeke MVC575 restoration project. We also worked closely with Mark Macy of Macy’s Garage (USA) on his wife’s TR4 – becoming the only Triumph TR to ever score the perfect 100-point score in the TRA Concours D’Elegance – back in 2018. Mark Macys own TR4 came in second place, at the same show – also with JSM trimmed fitted.
  • Access to help and advice when it comes time to fit these products – we have been making and fitting these same parts for a long time – we know all the tricks, and we are more than happy to assist you or your trimmer should you get stuck.

 


DISCOUNT – purchase this item as part of our Trim Panel Kit bundle to receive a cheaper price.


Unit of Sale

Lead Time (*approx.)

Number of Pieces

Suitable Models

, , ,

Year of Manufacture

, , , , , , ,

Chassis Number Range

, , ,

Misc. Information

, , , , , , , , , ,

Illustration Ref.

Please note that the colour names refer to internal John Skinner Ltd names, not necessarily the names Triumph originally used for these colours.

Due to industry-wide inconsistencies in production and record-keeping, it is widely accepted that the interpretation of original shades varies depending on who you ask. As a result, John Skinner Ltd offers multiple “original” shade options for you to make your final choice from. Below is a list of these accepted “original” colour choices that John Skinners can offer for your Triumph restoration project.

Black
Black
Black
Learn more
Midnight Blue
Midnight Blue
Midnight Blue
Learn more
Pale Shadow Blue
Pale Shadow Blue
Pale Shadow Blue
Learn more
Matador Red
Matador Red
Matador Red
Learn more
Cherry Red
Cherry Red
Cherry Red
Learn more
Bright Red
Bright Red
Bright Red
Learn more
Biscuit Light Tan
Biscuit Light Tan
Biscuit Light Tan
Learn more
White
White
White
Learn more

CUSTOM COLOURS/COMBINATIONS ALSO AVAILABLE

Note that we can also offer a variety of custom “non-original” shades if you prefer, or offer contrasting beading/piping for a more bespoke finish. For a full and complete list of options please view our Materials & Colours library.

SAMPLES/COLOUR CONFIRMATIONS

As part of the ordering process, we will arrange for samples to be sent for final confirmation – so browse and shop with complete peace of mind, knowing that we will guide you through step-by-step with all the information you require.

Please note that all materials are subject to colour shade differences between production batches. There may be subtle differences in colour shading between sample cuttings and final production material.

Due to the range of products we offer, and our worldwide customer base, we can only calculate an accurate shipping cost once Your Enquiry/Quote has been received by Jonathon. As there is no payment required at this stage – use our Quote Builder in full confidence, with zero commitment to purchase – and send us your Quotation request for your interior trim requirements; and we will get in touch directly with you with an updated Quote, which will include the shipment costs.

In the meantime, basic guideline shipping costs are outlined below.

(For all non-UK shipments – the final price per box depends on the size of the box – which is dictated by the items in your final selection)

UK: £10.50 – £30 per box

Europe & European Union: £20 – £150 per box

North America & Canada: £28.50 – £160 per box

Rest of World: £50.00 – £400 per box

Generally speaking, a complete car interior kit (Trim Panels, Carpets, Seat Covers, Boot/Trunk area, Soft Top Hoods etc) normally requires 2 x FULL Size Boxes, with some cars needing slightly less, and some slightly more.

Please note that these prices are exclusive of VAT (UK Customers ONLY) and any additional customs or handling charges that may be incurred during shipping. These prices are given as an approximation only.

For further information about shipping, and to learn more about how our shipping costs are calculated, please read our Shipping and Delivery guide.

 


🇪🇺 EU Shipments / Brexit 🇪🇺

As of January 2021, the UK is no longer part of the European Union (EU). As a result, several changes have been implemented which affects how EU based customers now purchase products from the UK.

It is not as problematic and complicated as people say. John Skinner Ltd sends hundreds of shipments to the EU; and rarely do we encounter any issues at all; and this is due to us working closely with our shipping agents to offer two choices that help to simplify the process for you.

You now have 2 Options you can choose from for shipping John Skinner products to the EU:

============

Option 1: Standard International Shipping

This is the ‘standard’ method of purchasing items from the UK, since the UK left the EU (‘Brexit’).

You will pay John Skinner Ltd for 1) the parts ordered, and 2) the shipping cost to ship from the UK to your address.

You will NOT be charged UK VAT (20% Tax). (Before Brexit, you would have been charged UK VAT @ 20%).

Once your parts ship, you will be contacted directly by our shipping agent (normally DHL), who will request payment from you for 1) Your Local Country Tax based on the value of the John Skinner Invoice, 2) a small admin fee (normally around €15). Once this is paid, your goods are released from customs and delivered to your address.

You will NOT be charged any Duties/Tariffs. All the parts we supply are made by John Skinner Ltd in the UK, and we provide all the correct paperwork & documentation and sign declarations to ensure that no Duties/Tariffs apply to our goods. (This is often the part that most people get confused by with Brexit – they assume that anything they buy from the UK incurs Duties/Tariff charges – our products are 0% Duty/Tariff rated).

Note that this shipping option is the default choice offered when Jonathon is raising your initial Quote; if you wish to discuss the second option (see below) – then just mention this to Jonathon once he has made direct contact with you about your enquiry.

============

Option 2: Prepaid Duties & Taxes *** VERY POPULAR OPTION ***

To simplify the purchasing process, you can choose our Prepaid Duties & Taxes option.

This process is becoming the most popular option for our EU customers as it makes everything very simple and straightforward, akin to how it was before the UK left the EU.

We will calculate & include all applicable import duties, taxes, and customs fees in your order total – and everything is paid up front to John Skinner Ltd.

Once the parts are ready and are shipped – you will NOT pay any additional costs, or have to do anything more – your order will be delivered to your address as normal. Our shipping agent (normally DHL) pays the Local Country Tax on behalf of John Skinner Ltd and they Invoice us for this later. This ensures that you won’t face any unexpected charges upon delivery, and your order will clear customs smoothly and quickly.

You can enjoy a more streamlined shopping experience with this option; like Brexit never even happened.

If you are interested in this option, please let Jonathon know once he has contacted you directly with your updated Quote via email; and he can update the Quote accordingly to reflect this choice.

============