No items have been added to Your Quote.
Quarter B Post Panels (Pair)
Suitable Models: TR3A
£128.49 – £286.70 exc. VAT UK Customers ONLY - VAT (20%) will be calculated at checkout.
These B Post Wheelarch Quarter Panel casings should not be overlooked when restoring your car. Even though they are situated behind the Front Seats – these Quarter Panels are quite prominent for anyone looking into your Triumph TR3A or TR3B – don’t let old and shabby panels let the car down.
Unofficially dubbed the TR3″A” – September 1957 saw some fairly major modifications to the TR3 – and this included updates to the interior trim and upholstery. An example of this was the B Post Quarter Panels which were slightly edited toward the top-rear corner which made allowances for changes to petrol fuel tank bulkhead area of the car. Unlike the earlier models, the TR3A also saw the introduction of piping on some of its panels, including the long curved edge on the top of the TR3A and TR3B door panels. This served a dual purpose of not only improving the aesthetics of the inside of the car; but also served a practical purpose in helping to hide the gaps between panels and bodywork! Triumph, like many other marques of this generation, were masters of deception on their production lines!
The TR3A/B models left the factory with the panels upholstered in Vynide (Leathercloth). Commonly these days, this material is superseded with Vinyl (Ambla), although Leathercloth (Vynide) is still available if requested (colour dependent). Very few cars, if any, would have left with Leather panels – and if they did, this would have been a special order item. Note when “Leather” is mentioned on the heritage certificates, this is often referring to the Seats and some of the Cappings around the cockpit of the car. See our FAQs for more information. The piping, which was now included as standard on the most of the panels, was predominantly in White leathercloth; with possibly a few special orders cars leaving with different coloured piping.
Our panels are templated using the original factory designs – and have been tried and tested for decades on thousands of cars around the world. It is no secret that these cars were manufactured during an era of inconsistent mass production techniques. As a result of this – we can never wholeheartedly say our panels fit 100% of the time – this would be foolish! However, due to decades of production of these parts and feedback from our clients and professional fitters – we are confident that we do offer the most consistent and best-fitting panels on the market. In addition to this, we offer after-sale support for those who require further assistance should any issues be encountered during the fitment process. Needless to say, this approach to manufacture has made John Skinner Ltd the industry benchmark in quality and finish for your Triumph TR3A / TR3B interior trim panels.
DETAILS
- Available in Leather, Vinyl (Ambla) or Leathercloth (Vynide).
- Two options of automotive-grade leather available to choose from – “grained” or “smooth” surface finish.
- Backing boards are pre-cut on our in-house CNC machine using automotive-grade 2.55mm hardboard wood, and they are pre-padded using a 3mm scrim nylon foam.
- Backing board includes pilot holes for convertible soft top metal frame mechanism.
- Correct “stub-tail” shape which is correct for the TR3A/B range; differing from the earlier “pointy-tail” TR2 and TR3 models.
- Includes pre-cut loose rectangles of material for covering the bodywork area at the base of the quarter panel.
- Includes piping on leading and outside curved edge; which was introduced as standard from chassis number TS22,014.
Why JSM?
- Made in England, only 50 miles away from the original production line.
- We source only the highest quality raw materials to manufacture our products – including leather from Italy and Scotland.
- The correct thickness for suitability on classic cars of this era – our 2.55mm thick hardboard panels offers the best fit whilst maintaining its core strength and water resistance. See FAQs for more information.
- John Skinners offer the widest range of colour options on the market – including all the correct original colour combinations, as well as many more custom shades.
- Worldwide material and colour samples service is available upon request, to ensure you get the look and finish your car deserves.
- Our kits are manufactured using the same methods and templates that we have used to great success for 40+ years. Rest assured, we know they fit!
- JSM has contributed to various notable Triumph restorations including TS01, and the much-publicised Triumph TR2 “Jabbeke“ MVC575 restoration project.
- Access to help and advice when it comes time to fit these panels – we have been making and fitting these same parts for a long time – we know all the tricks, and we are more than happy to assist you or your trimmer should you get stuck.
DISCOUNT – purchase this item as part of our Trim Panel Kit bundle to receive a cheaper price.
| Unit of Sale | |
|---|---|
| Lead Time (*approx.) | |
| Number of Pieces | |
| Suitable Models | |
| Year of Manufacture | |
| Chassis Number Range | TS22014 – TS60000, TS60001 – TS82347, TCF1 – TCF2804, TSF1 – TSF530 |
| Misc. Information | British Leyland, Coventry, Long Door, Short Door, Small Mouth, Standard Motors, Triumph, Wide Mouth |
| Illustration Ref. | |
| Original Factory Part Number | 556683-556694, 559933-559938, 559943-559946, 562208-562217, 703149, 802886, 803165, 850251-850252 |
Please note that the colour names refer to internal John Skinner Ltd names, not necessarily the names Triumph originally used for these colours.
Due to industry-wide inconsistencies in production and record-keeping, it is widely accepted that the interpretation of original shades varies depending on who you ask. As a result, John Skinner Ltd offers multiple “original” shade options for you to make your final choice from. Below is a list of these accepted “original” colour choices that John Skinners can offer for your Triumph restoration project.
Black
Midnight Blue
Grey
Maroon
Matador Red
Cherry Red
Bright Red
Dark Brown
New Tan
Cinnamon (Antiqued)
Biscuit Light Tan
Barley Beige
Stone
Light Stone Beige
White
CUSTOM COLOURS/COMBINATIONS ALSO AVAILABLE
Note that we can also offer a variety of custom “non-original” shades if you prefer, or offer contrasting beading/piping for a more bespoke finish. For a full and complete list of options please view our Materials & Colours library.
SAMPLES/COLOUR CONFIRMATIONS
As part of the ordering process, we will arrange for samples to be sent for final confirmation – so browse and shop with complete peace of mind, knowing that we will guide you through step-by-step with all the information you require.
Please note that all materials are subject to colour shade differences between production batches. There may be subtle differences in colour shading between sample cuttings and final production material.
Due to the range of products we offer, and our worldwide customer base, we can only calculate an accurate shipping cost once Your Enquiry/Quote has been received by Jonathon. As there is no payment required at this stage – use our Quote Builder in full confidence, with zero commitment to purchase – and send us your Quotation request for your interior trim requirements; and we will get in touch directly with you with an updated Quote, which will include the shipment costs.
In the meantime, basic guideline shipping costs are outlined below.
(For all non-UK shipments – the final price per box depends on the size of the box – which is dictated by the items in your final selection)
UK: £10.50 – £30 per box
Europe & European Union: £20 – £150 per box
North America & Canada: £28.50 – £160 per box
Rest of World: £50.00 – £400 per box
Generally speaking, a complete car interior kit (Trim Panels, Carpets, Seat Covers, Boot/Trunk area, Soft Top Hoods etc) normally requires 2 x FULL Size Boxes, with some cars needing slightly less, and some slightly more.
Please note that these prices are exclusive of VAT (UK Customers ONLY) and any additional customs or handling charges that may be incurred during shipping. These prices are given as an approximation only.
For further information about shipping, and to learn more about how our shipping costs are calculated, please read our Shipping and Delivery guide.
🇪🇺 EU Shipments / Brexit 🇪🇺
As of January 2021, the UK is no longer part of the European Union (EU). As a result, several changes have been implemented which affects how EU based customers now purchase products from the UK.
It is not as problematic and complicated as people say. John Skinner Ltd sends hundreds of shipments to the EU; and rarely do we encounter any issues at all; and this is due to us working closely with our shipping agents to offer two choices that help to simplify the process for you.
You now have 2 Options you can choose from for shipping John Skinner products to the EU:
============
Option 1: Standard International Shipping
This is the ‘standard’ method of purchasing items from the UK, since the UK left the EU (‘Brexit’).
You will pay John Skinner Ltd for 1) the parts ordered, and 2) the shipping cost to ship from the UK to your address.
You will NOT be charged UK VAT (20% Tax). (Before Brexit, you would have been charged UK VAT @ 20%).
Once your parts ship, you will be contacted directly by our shipping agent (normally DHL), who will request payment from you for 1) Your Local Country Tax based on the value of the John Skinner Invoice, 2) a small admin fee (normally around €15). Once this is paid, your goods are released from customs and delivered to your address.
You will NOT be charged any Duties/Tariffs. All the parts we supply are made by John Skinner Ltd in the UK, and we provide all the correct paperwork & documentation and sign declarations to ensure that no Duties/Tariffs apply to our goods. (This is often the part that most people get confused by with Brexit – they assume that anything they buy from the UK incurs Duties/Tariff charges – our products are 0% Duty/Tariff rated).
Note that this shipping option is the default choice offered when Jonathon is raising your initial Quote; if you wish to discuss the second option (see below) – then just mention this to Jonathon once he has made direct contact with you about your enquiry.
============
Option 2: Prepaid Duties & Taxes *** VERY POPULAR OPTION ***
To simplify the purchasing process, you can choose our Prepaid Duties & Taxes option.
This process is becoming the most popular option for our EU customers as it makes everything very simple and straightforward, akin to how it was before the UK left the EU.
We will calculate & include all applicable import duties, taxes, and customs fees in your order total – and everything is paid up front to John Skinner Ltd.
Once the parts are ready and are shipped – you will NOT pay any additional costs, or have to do anything more – your order will be delivered to your address as normal. Our shipping agent (normally DHL) pays the Local Country Tax on behalf of John Skinner Ltd and they Invoice us for this later. This ensures that you won’t face any unexpected charges upon delivery, and your order will clear customs smoothly and quickly.
You can enjoy a more streamlined shopping experience with this option; like Brexit never even happened.
If you are interested in this option, please let Jonathon know once he has contacted you directly with your updated Quote via email; and he can update the Quote accordingly to reflect this choice.
============
English
Français
Deutsch
Italiano
Español