Quarter B Post Panels (Pair)

After the changes to the bodywork shape of the Giovanni Michelotti redesigned Triumph TR4 models – a number of the interior trim and upholstery panels were also updated. Triumph embraced changes in technology and introduced HF/RF (High-Frequency/Radio-Frequency) embossed patterns on many of their trim assembly panels in the 1960s era. The B Post Quarter Panels featured a set of four embossed lines at the top of the panel, as well as a further 2 lines toward the bottom of this panel. All of these RF/HF lines ran from horizontally from front-to-back. As with its predecessor, the TR3A/B, this panel also featured piping/beading on the leading edge of the panel – serving a dual purpose of not only improving the aesthetics of the inside of the car; but also for a practical purpose in helping to hide the gaps between panels and bodywork! Triumph, like many other marques of this generation, were masters of deception on their production lines!

The TR4 models left the factory upholstered in a grained finish unsupported PVC material – often confused with Vynide (Leathercloth) which was used elsewhere in the cars. Commonly these days, this material is superseded with Vinyl (Ambla), although Leathercloth (Vynide) is still available if requested (colour dependent). Very few cars, if any, would have left with Leather panels – and if they did, this would have been a special order item. Note when “Leather” is mentioned on the heritage certificates, this is often only referring to the Seats. See our FAQs for more information. The piping, which was now included as standard on the most of the panels, was predominantly in White; with possibly a few special orders cars leaving with different coloured piping.

Our panels are templated using the original factory designs – and have been tried and tested for decades on thousands of cars around the world. We, at John Skinners, are also one of the only restorers in the world who can offer the original embossed HF pattern, which is a sentiment to our dedication to offering not only the best fitting items in the industry – but also the investment in the machinery and tooling to allow us to authentically reproduce the parts to the original specifications. In addition to this – we are also fully aware of the subtle, but essential difference in shape between the TR4 and TR4A rear quarter casing assembly panels. This attention to detail and in-depth knowledge further goes to illustrate why we are considered the leading interior trim manufacturers for Triumph TRs, and have been for over 40 years now.

DETAILS

• Available in Leather, Vinyl (Ambla) or Leathercloth (Vynide).
• Two options of automotive-grade leather available to choose from – “grained” or “smooth” surface finish.
• Includes the original embossed HF/RF horizontal 6-line (4 upper & 2 lower) pattern – John Skinners are one of the only manufacturers in the world to have the correct tooling for this part.
• Includes piping on the leading edge and some of the top section of the panel.
• Backing boards are pre-cut on our in-house CNC machine using automotive-grade 2.55mm hardboard wood, allowing for the gentle curvature fitment to the car to be achieved.
• Includes pre-drilled pilot holes on the backing panel for affixing to the bodywork of the car, as well as for the Seat Safety Belt mounting positions, and the hood frame mechanism mounting points.

Why JSM?

• Made in England, only 50 miles away from the original production line.
• We source only the highest quality raw materials to manufacture our products – including leather from Italy and Scotland.
• John Skinners offer the widest range of colour options on the market – including all the correct original colour combinations, as well as many more custom shades.
• Worldwide material and colour samples service is available upon request, to ensure you get the look and finish your car deserves.
• Our kits are manufactured using the same methods and templates that we have used to great success for 40+ years. Rest assured, we know they fit!
• JSM has contributed to various notable Triumph restorations including TS01, and the much-publicised Triumph TR2 “Jabbeke“ MVC575 restoration project. We also worked closely with Mark Macy of Macy’s Garage (USA) on his wife’s TR4 – becoming the only Triumph TR to ever score the perfect 100-point score in the TRA Concours D’Elegance – back in 2018. Mark Macys own TR4 came in second place, at the same show – also with JSM trimmed fitted.
• Access to help and advice when it comes time to fit these panels – we have been making and fitting these same parts for a long time – we know all the tricks, and we are more than happy to assist you or your trimmer should you get stuck.

DISCOUNT – purchase this item as part of our Trim Panel Kit bundle to receive a cheaper price.