Headliner Kit

Suitable Models: TR6

£173.56£270.78 exc. VAT UK Customers ONLY - VAT (20%) will be calculated at checkout.

Although not as widely seen or used as we would like – these hardtops look stunning when fitted to the cars – assuming the lining is up to scratch! John Skinners can offer a replacement kit in a variety of materials and colours. Please see below for more in-depth descriptions, videos, and frequently asked questions (FAQs).

Clear
⟲ Clear Selection

Recommended Colour Shades These are the colour shades that JSM can supply/recommend as suitable interpretations of original colours as stated on heritage certificates. Other "custom" shades also available.

SKU: TR-079541 Categories: , Tags: ,

With the introduction of the TR6, various changes were implemented by German engineering firm Karmann including elements of the bodywork and interior trim such as the hardtop section – which was still an optional extra from the factory. Very much carrying on where the earlier TR Surrey Top had left off – this hardtop now included the rear screen and b post windows as part of the main section – supplied as one piece, which was detachable from the car for storage. This update effectively meant that when in use, your car was a fixed-head two-seater sports car, or when removed it was a fully convertible open-two seater; with no in-between option available for the TR6.

Although not as widely seen as the earlier TR4-TR250 “Surrey Top” styling – the TR6 hardtop is still something that you see from time to time. For the first fifty thousand or so cars, the inside lining of this hard top roof assembly was upholstered in a Black PVC material; with some speculation over a few cars leaving with White PVC. In 1970, and onwards from this year – the majority of the hardtops would have left with a Beige PVC material. It should be noted that “beige” is a very ambiguous reference – with the reality being that this colour was much more of a “dirty” off-white material, based on the original samples and examples that we have access to. Differing from the earlier cars – this hardtop headlining included the materials for the rear quarter windows already sewn and attached to the main roof lining section. In addition to this, a matching material was used to re-trim the cover panels for the rear shelf at the base of the hardtop windows – as well as the b post quarter light upright supports. Following a very similar concept to the earlier surrey top cars – the main headliner section featured sewn scrim loops on the reverse of the headliner – to allow the rails/rods to be inserted during the fitment process.

Over our 40 years of production, John Skinner Ltd has manufactured countless numbers of these Headliner kits to clients all over the world. Our templates for this specific part have been replicated using original factory doner cars, of which John himself has owned various models – enabling us to try and test the fitment of this panel first hand. As a result of this first-hand experience, we have also updated our kits to make the parts wider and longer than they need to be – enabling for the excess material to used to pull and stretch easily during the fitment process – before being trimmed off at the final stage. This depth of knowledge and updating of patterns and designs due to both first-hand experience as well as constructive feedback from our worldwide base of clients has made John Skinner Ltd the leading manufacturer of interior trim and upholstery for the Triumph TR range; with a history of manufacturing the same parts spanning more than 40 years.

DETAILS

  • Available in PVC Headliner, Vinyl (Ambla), or Wool “West of England” Union Cloth.
  • Headliner section is pre-sewn with scrim loops on the underside for the insertion of the fitment rod rails.
  • Includes loose material for re-covering the b post supports and rear shelf assembly casings.
  • Extra excess material on edges to allow for easier fitment.

Why JSM?

  • Made in England, only 50 miles away from the original production line.
  • We source only the highest quality raw materials to manufacture our products – including leather from Italy and Scotland.
  • John Skinners offer the widest range of colour options on the market – including all the correct original colour combinations, as well as many more custom shades.
  • Worldwide material and colour samples service is available upon request, to ensure you get the look and finish your car deserves.
  • Our kits are manufactured using the same methods and templates that we have used to great success for 40+ years. Rest assured, we know they fit!
  • JSM has contributed to various notable Triumph restorations including TS01, and the much-publicised Triumph TR2 “Jabbeke MVC575 restoration project. We also worked closely with Mark Macy of Macy’s Garage (USA) on his wife’s TR4 – becoming the only Triumph TR to ever score the perfect 100-point score in the TRA Concours D’Elegance – back in 2018. Mark Macys own TR4 came in second place, at the same show – also with JSM trimmed fitted.
  • Access to help and advice when it comes time to fit these parts – we have been making and fitting these same parts for a long time – we know all the tricks, and we are more than happy to assist you or your trimmer should you get stuck. As noted above, John himself has used this part on a number of his own TRs, so we are well versed in the fitment process.
Unit of Sale

Lead Time (*approx.)

Number of Pieces

Suitable Models

Year of Manufacture

, , , , , , , ,

Chassis Number Range

, , , , , ,

Misc. Information

, , , , , , , , , , ,

Illustration Ref.

Original Factory Part Number

,

Please note that the colour names refer to internal John Skinner Ltd names, not necessarily the names Triumph originally used for these colours.

Due to industry-wide inconsistencies in production and record-keeping, it is widely accepted that the interpretation of original shades varies depending on who you ask. As a result, John Skinner Ltd offers multiple “original” shade options for you to make your final choice from. Below is a list of these accepted “original” colour choices that John Skinners can offer for your Triumph restoration project.

White PVC Headlining
White PVC Headlining
White PVC Headlining
Learn more
Black PVC Headlining
Black PVC Headlining
Black PVC Headlining
Learn more

CUSTOM COLOURS/COMBINATIONS ALSO AVAILABLE

Note that we can also offer a variety of custom “non-original” shades if you prefer a more bespoke finish. For a full and complete list of options please view our Materials & Colours library.

SAMPLES/COLOUR CONFIRMATIONS

As part of the ordering process, we will arrange for samples to be sent for final confirmation – so browse and shop with complete peace of mind, knowing that we will guide you through step-by-step with all the information you require.

Please note that all materials are subject to colour shade differences between production batches. There may be subtle differences in colour shading between sample cuttings and final production material.

Due to the range of products we offer, and our worldwide customer base, we can only calculate an accurate shipping cost once Your Enquiry/Quote has been received by Jonathon. As there is no payment required at this stage – use our Quote Builder in full confidence, with zero commitment to purchase – and send us your Quotation request for your interior trim requirements; and we will get in touch directly with you with an updated Quote, which will include the shipment costs.

In the meantime, basic guideline shipping costs are outlined below.

(For all non-UK shipments – the final price per box depends on the size of the box – which is dictated by the items in your final selection)

UK: £10.50 – £30 per box

Europe & European Union: £20 – £150 per box

North America & Canada: £28.50 – £160 per box

Rest of World: £50.00 – £400 per box

Generally speaking, a complete car interior kit (Trim Panels, Carpets, Seat Covers, Boot/Trunk area, Soft Top Hoods etc) normally requires 2 x FULL Size Boxes, with some cars needing slightly less, and some slightly more.

Please note that these prices are exclusive of VAT (UK Customers ONLY) and any additional customs or handling charges that may be incurred during shipping. These prices are given as an approximation only.

For further information about shipping, and to learn more about how our shipping costs are calculated, please read our Shipping and Delivery guide.

 


🇪🇺 EU Shipments / Brexit 🇪🇺

As of January 2021, the UK is no longer part of the European Union (EU). As a result, several changes have been implemented which affects how EU based customers now purchase products from the UK.

It is not as problematic and complicated as people say. John Skinner Ltd sends hundreds of shipments to the EU; and rarely do we encounter any issues at all; and this is due to us working closely with our shipping agents to offer two choices that help to simplify the process for you.

You now have 2 Options you can choose from for shipping John Skinner products to the EU:

============

Option 1: Standard International Shipping

This is the ‘standard’ method of purchasing items from the UK, since the UK left the EU (‘Brexit’).

You will pay John Skinner Ltd for 1) the parts ordered, and 2) the shipping cost to ship from the UK to your address.

You will NOT be charged UK VAT (20% Tax). (Before Brexit, you would have been charged UK VAT @ 20%).

Once your parts ship, you will be contacted directly by our shipping agent (normally DHL), who will request payment from you for 1) Your Local Country Tax based on the value of the John Skinner Invoice, 2) a small admin fee (normally around €15). Once this is paid, your goods are released from customs and delivered to your address.

You will NOT be charged any Duties/Tariffs. All the parts we supply are made by John Skinner Ltd in the UK, and we provide all the correct paperwork & documentation and sign declarations to ensure that no Duties/Tariffs apply to our goods. (This is often the part that most people get confused by with Brexit – they assume that anything they buy from the UK incurs Duties/Tariff charges – our products are 0% Duty/Tariff rated).

Note that this shipping option is the default choice offered when Jonathon is raising your initial Quote; if you wish to discuss the second option (see below) – then just mention this to Jonathon once he has made direct contact with you about your enquiry.

============

Option 2: Prepaid Duties & Taxes *** VERY POPULAR OPTION ***

To simplify the purchasing process, you can choose our Prepaid Duties & Taxes option.

This process is becoming the most popular option for our EU customers as it makes everything very simple and straightforward, akin to how it was before the UK left the EU.

We will calculate & include all applicable import duties, taxes, and customs fees in your order total – and everything is paid up front to John Skinner Ltd.

Once the parts are ready and are shipped – you will NOT pay any additional costs, or have to do anything more – your order will be delivered to your address as normal. Our shipping agent (normally DHL) pays the Local Country Tax on behalf of John Skinner Ltd and they Invoice us for this later. This ensures that you won’t face any unexpected charges upon delivery, and your order will clear customs smoothly and quickly.

You can enjoy a more streamlined shopping experience with this option; like Brexit never even happened.

If you are interested in this option, please let Jonathon know once he has contacted you directly with your updated Quote via email; and he can update the Quote accordingly to reflect this choice.

============