Carpet Set

What materials are available?

We can manufacture Carpets Sets for this model of car in Tufted Nylon, Karvel (Ribbed), or Deluxe Woven Wool. Note that the Nylon and Wool options have a rubber backing, whereas the Karvel has a hessian backing. Please refer to our Materials & Colours library for more information.

What material is original for this model of car?

Austin Healey models left the factory with Karvel for the main cockpit carpeted areas. This material is “ribbed” pile carpet with a hessian backing. The ribs originally went from left to right across the width of the car. Note that there are limited shades available for Karvel. There is a much wider selection of colours available in Deluxe Woven Wool and Nylon. Please refer to our Materials & Colours library for more information.

Are these carpets edged?

Yes – we edge our carpets kits using Leathercloth (Vynide) binding, where available. Not all edges are bound; some are raw edges – but these are normally hidden during the fitting process under adjacent edged pieces or panels. Please refer to our Materials & Colours library for more information.

Where Austin Healey Carpets originally edged?

This is a subject of much debate amongst enthusiasts, and due to the very inconsistent original factory production lines, and their poor record keeping – it is hard to say 100% for sure. JSM will standardly edge their carpet kits, unless explicitly instructed not to by our customers.

Do you supply the original multi-piece Gearbox carpet cover that was original for the BN1 models?

Yes. We can supply the original specification Gearbox Tunnel cover of the BN1 which was supplied in various pieces. This is unlike the later 100-4 BN1 model and subsequent 100-6 and 3000 models which switched to a longer one-part version. Note that some clients sometimes prefer to switch to the later BN2 version – which will fit the BN1 cars. If this is what you would prefer – simply state this when confirming the order.

What are the pre-sewn flaps of material on some of the Gearbox Tunnel carpets for?

These sewn pieces of material on some edges are used to attach and anchor the carpet pieces in place on the removable elements of the Gearbox tunnel.

Do the carpets have a pre-cut hole for the ashtray?

No. These holes are best cut in-situ when fitting the carpet to the car, to achieve the most accurate fit.

What are the pre-cut loose materials pieces for?

We include pre-cut loose pieces of material for re-covering various bodywork areas related to carpet pieces. These should be glued to the actual body metalwork of the car in the applicable areas – thus hiding any metalwork in areas where the carpet is not present. For example, we include a piece of material to cover the bodywork surrounding the handbrake lever. We also supply materials to cover the gearbox housing area where the Gearstick Lever is located.

Do the Rear Floor Carpets include pre-cut slots for the Seat Runners?

The Rear Floor Carpets (under the Seats) are not included in the Carpet Set. Note that for the BN1 and BN2 models these parts were not originally supplied in Carpet – they were supplied in ribbed Armacord. As a result we supply these parts as part of the Rear Deck and Spare Wheel Cover Kit. But “Yes” – they do include the pre-cut slots for the Seat Runners!

Are the carpets supplied with Heelpads?

Yes, we supply pre-glued and sewn Rubber Heelpads on the driver’s side Front Floor Carpet. According to our records, all the BN1 models left the factory production line with only a heelpad on the Drivers side. If you wish for Heelpads on both Front Floors – then simply state this when confirming the order; there is no surcharge for this. These rubber heelpads include the “Austin” text in the centre of them.

Do I need an under-carpet felt kit (underfelt kit)?

Yes. we recommend fitting an underfelt kit, which we can provide. Note that these felt kits are designed not only to reduce heat and sound – but they were also essential to ensure the best fit and finish of the associated carpet pieces. Even if you have a modern-day version of heat and sound deadening kit already fitted – we strongly recommend ensuring you have a certain thickness of material underneath the carpets to ensure the best fit. See our Materials & Colours section for more information.

Are the carpet fixings included and pre-fitted to the carpets?

No. We can supply the correct carpet fixings for these cars – but these are sold separately. It is also worth noting that pre-inserted fixings are not recommend – it is a much better idea to insert these when you come to fit your carpets in your car, to ensure the best positioning and fitment.

Does this kit include the Carpet for the underdash parcel tray?

Yes. This carpet piece is included in the kit. Note that the pre-sewn material surround to re-cover the actual metal tray is not included in the Carpet Set. Please view the Parcel Tray Re-Trim Kit or the Trim Panel Kit for more options.